The role of ice makers on fishing boats

Fishing boat seafood preservation features: Generally small fishing boats buy large pieces of ice in the ice factory, or buy small Marine ice machine, generally have a daily production of 1 ton Marine ice machine, a daily production of 2 tons Marine ice machine are suitable for installation on small fishing boats.

Large and medium-sized fisheries rarely have enough to buy large ice cubes, so Marine ice machines are usually installed. Now that they are not affected by ice, they can return home with full loads every time they go to sea. They usually install 3 tons of ice machines, 4 tons of ice machines, 5 tons of ice machines and 6 tons of ice machines per day.

General installation of Marine ice machine effect is the best, than to buy ice is simple and convenient, will not be affected by the restriction of ice fishing. Seafood preservation is also more guaranteed.

Now more and more fishing boats begin to choose the floating ice machine, the floating ice machine than the ice and sheet machine cooling faster, but not for a long time.

Characteristics of fluid ice machine:

1, super refrigeration, can flow 0.25mm-0.5mm ice crystal, can fully contact with refrigerated materials, even can flow into the internal space. In all known ice bodies, the contact and heat transfer area between the fluid ice and the object to be cooled almost reaches 100%, which can wrap the fresh-keeping articles in all aspects, and the cooling time is shorter and faster.

2, very controllable, soft ice, can flow, will not hurt the refrigerated goods. Different from other types of solid ice, such as block ice, sheet ice, tube ice, square ice and so on, the fluid ice machine can obtain the ideal ice temperature and ice concentration by adjusting the ratio of water solution to ice.

3, save labor, because of its good fluidity, flow ice can be pumped to the freezing point through a hose or pipe. Transport more convenient, greatly save the cost of manual operation.

4, low energy consumption, larger contact area, faster cooling speed. Compared with other refrigeration methods, it can save at least 1/3 time. The temperature difference required for ice making is small. The difference between the evaporation temperature of the refrigeration system and the freezing temperature of brine is about 5-6℃, and the flow ice can be made, while other ice makers need to keep the temperature difference range of 10-13℃.